|
Started experiencing rather strange behaviour at times with the unit. Usually when navigating to a waypoint which is off a road, the unit will autonavigate to the closest point to the waypoint and then command you to leave the road in a direct path to the waypoint. This is normal, and have always experienced the same behaviour with other units.
Occasionally however the unit goes absolutely nuts. It would route in entirely the opposite direction and route until it reaches the end of the loaded mapset and then perform a u-turn and route back to the cache. This typically ends up in the unit wanting me to route on a 2000km trip despite the fact that I’m a mere 3km from the waypoint. I first thought it may be a problem with the road on the mapset. I created a waypoint on the road to test this theory and the unit routed fine.
In addition, when the unit does this it automatically shuts down. When starting the unit up again, it immediately starts calculating and if I do not cancel the calculation it shuts down again.
Anyone else experience this?
|
Login
Register
FAQ
